怎么查看服务器硬盘用了多久了

CodyDoby

试了下，怎么老报错

1. root@PAR-258395:/# sudo apt-get install smartmontools && sudo smartctl --all /dev/sda3
   
2. Reading package lists... Done
   
3. Building dependency tree      
   
4. Reading state information... Done
   
5. smartmontools is already the newest version (6.6-1).
   
6. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
   
7. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-13-amd64] (local build)
   
8. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
   
9. 
   
10. === START OF INFORMATION SECTION ===
    
11. Vendor:               Dell
    
12. Product:              Virtual Disk
    
13. Revision:             1028
    
14. Compliance:           SPC-4
    
15. User Capacity:        1,999,307,276,288 bytes [1.99 TB]
    
16. Logical block size:   512 bytes
    
17. Logical Unit id:      0x600508e0000000007e225ea7781d6100
    
18. Device type:          disk
    
19. Local Time is:        Mon Jan 11 14:18:50 2021 CET
    
20. SMART support is:     Unavailable - device lacks SMART capability.
    
21. 
    
22. === START OF READ SMART DATA SECTION ===
    
23. Current Drive Temperature:     0 C
    
24. Drive Trip Temperature:        0 C
    
25. 
    
26. Error Counter logging not supported
    
27. 
    
28. Device does not support Self Test logging

复制代码

clf42

自己看看挂载的盘名

remarkable

你得看你独服硬盘挂载的盘名，用fdisk -l看一下，然后再smartctl -A /dev/***

tomcb

Product:              Virtual Disk

CodyDoby

remarkable 发表于 2021-1-11 21:31
你得看你独服硬盘挂载的盘名，用fdisk -l看一下，然后再smartctl -A /dev/***

应该没错哦

1. root@PAR-258395:/# sudo fdisk -l
   
2. Disk /dev/sda: 1.8 TiB, 1999307276288 bytes, 3904897024 sectors
   
3. Disk model: Virtual Disk   
   
4. Units: sectors of 1 * 512 = 512 bytes
   
5. Sector size (logical/physical): 512 bytes / 512 bytes
   
6. I/O size (minimum/optimal): 512 bytes / 512 bytes
   
7. Disklabel type: dos
   
8. Disk identifier: 0x77a7ac8c
   
9. 
   
10. Device     Boot   Start        End    Sectors  Size Id Type
    
11. /dev/sda1  *       2048    1048575    1046528  511M 83 Linux
    
12. /dev/sda2       1048576    3196927    2148352    1G 82 Linux swap / Solaris
    
13. /dev/sda3       3196928 3904894975 3901698048  1.8T 83 Linux

复制代码

CodyDoby

tomcb 发表于 2021-1-11 21:31

这就不懂了，这是OneProvider的独立服务器

remarkable

CodyDoby 发表于 2021-1-11 22:07
应该没错哦

你这直接smartctl -A /dev/sda就可以了

tomcb

CodyDoby 发表于 2021-1-11 22:07
应该没错哦

你这物理盘是/dev/sda，下面123是分的区。

CodyDoby

matoi 发表于 2021-1-11 22:10
试试

好像也不行，是这样操作的吗

1. oot@PAR-258395:/# smartctl -d sat /dev/sda3
   
2. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-13-amd64] (local build)
   
3. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
   
4. 
   
5. ATA device successfully opened
   
6. 
   
7. Use 'smartctl -a' (or '-x') to print SMART (and more) information
   
8. 
   
9. root@PAR-258395:/# smartctl -d sat -a /dev/sda3
   
10. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-13-amd64] (local build)
    
11. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
    
12. 
    
13. Read Device Identity failed: scsi error badly formed scsi parameters
    
14. 
    
15. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
    
16. root@PAR-258395:/# smartctl -d sat -a /dev/sda3 -T permissive
    
17. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-13-amd64] (local build)
    
18. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
    
19. 
    
20. Read Device Identity failed: scsi error badly formed scsi parameters
    
21. 
    
22. === START OF INFORMATION SECTION ===
    
23. Device Model:     [No Information Found]
    
24. Serial Number:    [No Information Found]
    
25. Firmware Version: [No Information Found]
    
26. Device is:        Not in smartctl database [for details use: -P showall]
    
27. ATA Version is:   [No Information Found]
    
28. Local Time is:    Mon Jan 11 15:34:42 2021 CET
    
29. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
    
30. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
    
31. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

复制代码